rod carbide Cemented bisa dipaké pikeun nyieun pabrik tungtung, rupa bor bit, mobil cutter husus, mesin cutters husus, horologi, ngolah cutters husus, integral nangtung panggilingan cutter, graver jeung sajabana Ogé, tungsten carbide rod bisa dijieun kana alloy teuas. punches, mandrels, puseur, sarta parabot perforation.
1. lalawanan maké alus, kateguhan luhur, precision tinggi, deformasi hadé tur lalawanan narekahan
2. Advanced parabot Tonjolan otomatis pikeun ngahasilkeun
3. HIP sintering na precision grinding pikeun mastikeun boga kinerja alus
4. Duanana kosong tur rengse kaayaan sadia
5. Bisa ngahontal permukaan pangaruh eunteung sanggeus grinding akurat tur polishing
Batang Karbida Padet (Panjang lengkep) | |||||
Nominal Dia | D (mm) | D (mm) | Panjangna | Ucapan | |
D (mm) | Un-taneuh | h6 | mm | ||
0.5 | 0.7 | 0.5 | 310-330 | ||
0.8 | 1 | 0.8 | 310-330 | ||
1 | 1.2 | 1 | 310-330 | ||
1.5 | 1.7 | 1.5 | 310-330 | ||
1/16" | 1.5875 | 1.8 | 1.5875 | 12"-13" | ukuran inci |
2 | 2.2 | 2 | 310-330 | ||
2.35 | 2.55 | 2.35 | 310-330 | ||
3/32" | 2.38 | 2.6 | 2.38 | 12"-13" | ukuran inci |
2.5 | 2.7 | 2.5 | 310-330 | ||
3 | 3.2 | 3 | 310-330 | ||
1/8" | 3.175 | 3.4 | 3.175 | 12"-13" | ukuran inci |
3.5 | 3.7 | 3.5 | 310-330 | ||
5/32 | 3.968 | 4.2 | 3.968 | 12"-13" | ukuran inci |
4 | 4.2 | 4 | 310-330 | ||
4.5 | 4.5 | 310-330 | |||
3/16" | 4.7625 | 5 | 4.762 | 12"-13" | ukuran inci |
5 | 5.2 | 5 | 310-330 | ||
5.5 | 5.7 | 5.5 | 310-330 | ||
6 | 6.2 | 6 | 310-330 | ||
1/4" | 6.35 | 6.6 | 6.35 | 12"-13" | ukuran inci |
6.5 | 6.7 | 6.5 | 310-330 | ||
7 | 7.2 | 7 | 310-330 | ||
7.5 | 7.7 | 7.5 | 310-330 | ||
5/16" | 7.937 | 8.2 | 7.937 | 12"-13" | ukuran inci |
8 | 8.2 | 8 | 310-330 | ||
8.5 | 8.7 | 8.5 | 310-330 | ||
9 | 9.2 | 9 | 310-330 | ||
9.5 | 9.7 | 9.5 | 310-330 | ||
3/8" | 9.525 | 9.7 | 9.525 | 12"-13" | ukuran inci |
10 | 10.2 | 10 | 310-330 | ||
10.5 | 10.7 | 10.5 | 310-330 | ||
11 | 11.2 | 11 | 310-330 | ||
7/16" | 11.11 | 11.3 | 11.11 | 12"-13" | ukuran inci |
11.5 | 11.7 | 11.5 | 310-330 | ||
12 | 12.2 | 12 | 310-330 | ||
12.5 | 12.7 | 12.5 | 310-330 | ||
1/2" | 12.7 | 12.9 | 12.7 | 12"-13" | ukuran inci |
13 | 13.2 | 13 | 310-330 | ||
13.5 | 13.7 | 13.5 | 310-330 | ||
14 | 14.2 | 14 | 310-330 | ||
9/16" | 14.288 | 14.5 | 14.288 | 12"-13" | ukuran inci |
14.5 | 14.7 | 14.5 | 310-330 | ||
15 | 15.2 | 15 | 310-330 | ||
15.5 | 15.7 | 15.5 | 310-330 | ||
5/8" | 15.875 | 16.1 | 15.875 | 12"-13" | ukuran inci |
16 | 16.2 | 16 | 310-330 | ||
16.5 | 16.7 | 16.5 | 310-330 | ||
17 | 17.2 | 17 | 310-330 | ||
17.5 | 17.7 | 17.5 | 310-330 | ||
18 | 18.2 | 18 | 310-330 | ||
18.5 | 18.7 | 18.5 | 310-330 | ||
19 | 19.2 | 19 | 310-330 | ||
3/4" | 19.05 | 19.3 | 19.05 | 12"-13" | ukuran inci |
19.5 | 19.7 | 19.5 | 310-330 | ||
20 | 20.2 | 20 | 310-330 | ||
20.5 | 20.7 | 20.5 | 310-330 | ||
21 | 21.2 | 21 | 310-330 | ||
21.5 | 21.7 | 21.5 | 310-330 | ||
22 | 22.2 | 22 | 310-330 | ||
22.5 | 22.7 | 22.5 | 310-330 | ||
23 | 23.2 | 23 | 310-330 | ||
23.5 | 23.7 | 23.5 | 310-330 | ||
24 | 24.2 | 24 | 310-330 | ||
24.5 | 24.7 | 24.5 | 310-330 | ||
25 | 25.2 | 25 | 310-330 | ||
1" | 25.4 | 25.7 | 25.4 | 12"-13" | ukuran inci |
26 | 26.3 | 26 | 310-330 | ||
27 | 27.2 | 27 | 310-330 | ||
28 | 28.2 | 28 | 310-331 | ||
29 | 29.2 | 29 | 310-333 | ||
30 | 30.2 | 30 | 310-334 | ||
31 | 31.2 | 31 | 310-335 | ||
1-1/4" | 31.75 | 32 | 31.75 | 12"-13" | ukuran inci |
32 | 32.2 | 32 | 310-336 | ||
33 | 33.2 | 33 | 310-337 | ||
34 | 34.2 | 34 | 310-338 | ||
35 | 35.2 | 35 | 310-339 | ||
36 | 36.2 | 36 | 310-340 | ||
37 | 37.2 | 37 | 310-341 | ||
38 | 38.2 | 38 | 310-342 | ||
1-1/2" | 38.1 | 38.4 | 38.1 | 12"-13" | ukuran inci |
39 | 39.2 | 39 | 310-343 | ||
40 | 40.2 | 40 | 310-344 | ||
42 | 42.2 | 42 | 310-344 |
Kelas Perkenalan pikeun Carbide Rod | |||||||
Kelas | Co% | WC ukuran gandum | HRA | HV | Kapadetan (g/cm³) | Kakuatan lentur (MPa) | Kateguhan narekahan (MNm-3/2) |
KT10F | 6 | Submicron | 92.9 | 1840 | 14.8 | 3800 | 10 |
KT10UF | 6 | superfine | 93.8 | 2040 | 14.7 | 3200 | 9 |
KT10NF | 6 | nanometer | 94.5 | 2180 | 14.6 | 4000 | 9 |
KT10C | 7 | muhun | 90.7 | 1480 | 14.7 | 3800 | 12 |
KT11F | 8 | Submicron | 92.3 | 1720 | 14.6 | 4100 | 10 |
KT11UF | 8 | superfine | 93.5 | 1960 | 14.5 | 3000 | 9 |
KT12F | 9 | superfine | 93.5 | 1960 | 14.4 | 4500 | 10 |
KT12NF | 9 | nanometer | 94.2 | 2100 | 14.3 | 4800 | 9 |
KT15D | 9 | Submicron | 91.2 | 1520 | 14.4 | 4000 | 13 |
KT15F | 10 | Submicron | 92.0 | 1670 | 14.3 | 4000 | 11 |
KT20F | 10 | Submicron | 91.7 | 1620 | 14.4 | 4300 | 11 |
KT20D | 10 | Submicron | 92.0 | 1670 | 14.3 | 4500 | 11 |
KT25F | 12 | superfine | 92.4 | 1740 | 14.1 | 5100 | 10 |
KT25EF | 12 | superfine | 92.2 | 1700 | 14.1 | 4800 | 10 |
KT25D | 12 | superfine | 91.5 | 1570 | 14.2 | 4200 | 13 |
KT37NF | 15 | nanometer | 92.0 | 1670 | 13.8 | 4800 | 10 |